Change Motherboard Serial Number

Posted on by

Swords and sandals 2. In Windows, you can see information about the motherboard installed in your PC using various GUI tools. In Linux, there are no such tools installed out of the box. While you can install some of them to get motherboard information, there is a single console command you can issue and get your motherboard model and other details instantly.

Number
  • I wouldnt expect that to work. The properties of Win32BaseBoard are read-only as per MSDN. Data type: string. Access type: Read-only Assuming your BIOS supports it, in most cases, you would have to change it there.
  • I have used the Asset Utility to change the Service Tag # on an R720. It does not work on 13 Generation and up servers. I have tried everything on 2 different R630 servers after motherboard changes and the only way thus far has been to order mother boards from Dell directly with the Service Tag # cleared.
  • Serial Change Steps: Remove the R W screw from the motherboard; After it boots into developer mode, press CTR+ALT+F2 the key, this should open a terminal; In the terminal type 'chronos' Then 'sudo su' Then 'vpd -l' On the displayed list you are looking for 'serialnumber' To change the entry do the following.
  • I just replaced the motherboard in a Dell Inspiron 1440. The last step in the Dell Service Manual is to enter the correct Service Tag within BIOS. When I started it up and hit F2 and the section with the service tag could not be changed. Is there another way of changing the service tag to the correct one.

There is a special console tool dmidecode which utilizes sysfs to provide information about your motherboard. Here is a brief description of the tool taken from its man page.

dmidecode is a tool for dumping a computer's DMI (some say SMBIOS) table contents in a human-readable format. This table contains a description of the system's hardware components, as well as other useful pieces of information such as serial numbers and BIOS revision. Thanks to this table, you can retrieve this information without having to probe for the actual hardware.

Entering the BIOS / UEFI on your replacement HP system board and then going to system IDs will normally only reveal three or four fields, instead of the full 7.

Change

While this is a good point in terms of report speed and safeness, this also makes the presented information possibly unreliable. The DMI table doesn't only describe what the system is currently made of, it also can report the possible evolutions (such as the fastest supported CPU or the maximal amount of memory supported).

SMBIOS stands for System Management BIOS, while DMI stands for Desktop Management Interface. Both standards are tightly related and developed by the DMTF (Desktop Management Task Force).

As you run it, dmidecode will try to locate the DMI table. It will first try to read the DMI table from sysfs, and next try reading directly from memory if sysfs access failed. If dmidecode succeeds in locating a valid DMI table, it will then parse this table and display a list of records like this one:

Handle 0x0002, DMI type 2, 8 bytes.
Base Board Information Manufacturer: Intel
Product Name: C440GX+
Version: 727281-001
Serial Number: INCY92700942

Windows

Each record has:

A handle. This is a unique identifier, which allows records to reference each other. For example, processor records usually reference cache memory records using their handles.

A type. The SMBIOS specification defines different types of elements a computer can be made of. In this example, the type is 2, which means that the record contains 'Base Board Information'.

A size. Each record has a 4-byte header (2 for the handle, 1 for the type, 1 for the size), the rest is used by the record data. This value doesn't take text strings into account (these are placed at the end of the record), so the actual length of the record may be (and is often) greater than the displayed value.

Serial

Decoded values. The information presented of course depends on the type of record. Here, we learn about the board's manufacturer, model, version and serial number.

To find the motherboard model in Linux, do the following.

Change Motherboard Serial Number Lenovo

  1. Open a root terminal.
  2. Type the following command to get the brief information about your motherboard:

    The output will be like this:

  3. To get more details about your motherboard information, type or copy-paste the following command as root:

    See the following screenshot:

Change Bios Serial Number Lenovo

The -t argument filters the output by the specified DMI type. 2 means 'Baseboard'.

When you are using the 'baseboard' option for the -t argument, it uses a combination of DMI types (as SMBIOS specification defines), so you see more details.

Type man dmidecode to learn more about its command line argument.

That's it.

How To Find Motherboard Model Number

Advertisment