Everstart 3a Smart Charger Manualwesternagents

Posted on by

Colormediumanne 28 online free games. EverStart battery combines both reliability and affordability. So if you need a quick battery change on a tight budget but still wants to have that peace of mind for a couple of years, this battery brand should be considered. Rely on this battery name to power for vehicle, home and gardening tools, sporting or recreational vehicle, etc. That is aside from the fact that it is available in all Walmart stores making it extremely accessible.

EverStart Smart Charger & Maintainer And More, 2 Pieces. Get a great deal with this online auction presented by PropertyRoom.com on behalf of a law enforcement or public agency client. EverStart smart charger & maintainer, 6811A; MRC Technology battery charger, MRC24-4LX; Cosmetic Condition: Good, with scratches, scuffs, dirt, nick, and wear. Everstart chargers equipped with a 12-amp charge capacity will also have the ability to set the amperage at a lower, 'trickle' charge and 'medium' charge setting. Slide the switch to a 2-amp charge or 'trickle' charge, as this is the most effective means of charging your battery.

About the battery brand

EverStart is a battery brand exclusively distributed and sold by the retail giant Walmart. Its developer and manufacture is the Milwaukee based company Johnson Controls. Though not that popular, Johnson Controls is a giant company producing automotive interior systems including electronics and batteries. It also has a global reach with markets, offices and production facilities scattered across the six continents. As an EverStart battery guide, its battery line sold by Walmart includes the automotive, marine, lawn and garden batteries and those for power sports. Almost all essential battery and power accessories are also offered by the brand.

EverStart Battery Options

As mentioned above, this battery brand caters to almost all your DC energy needs. The different categories include the following:

  • Automotive batteries. These are the most basic and popular battery sold by the brand, those intended for your vehicle. Aside from the varying sizes, there are two major categories for these batteries, the EverStart Plus and the EverStart Maxx. The Plus tag is the basic or ordinary types while the Maxx are the longer-lasting ones with 5-year extended warranty.
  • Marine batteries. The EverStart marine battery is the heavy-duty type. Compared to the basic lead acid type which delivers huge energy but less sustaining, the marine or deep cycle types are capable of delivering constant rate of energy for a longer period of time. So if you need long lasting power for your vehicle or even household power needs, this is the best type to choose.
  • Lawn and garden batteries. The brand also creates batteries for your lawn and garden power tools like mowers and grass cutters.
  • PowerSport batteries. Perhaps, the PowerSport category is the most advance battery EverStart offers. As its name suggests, these types of DC power banks are designed for your sporting vehicles like big bikes, racing bikes, snowmobiles, etc.

Best Battery Features

Here are the best or top features of the brand which can also be read from any EverStart battery review:

  • With these batteries, you can be assured of quality make and efficiency at a relatively cheaper price than the other brands.
  • Batteries (especially for the automobile) clearly labeled with “N” or “S” and CCA for the best decision making. N or North is designed for the cold northern regions while the S is intended for the warmer south.
  • Benefit from the extended warranty that could rival the top selling brands. The EverStart battery Plus has a minimum warranty period of 2 years while the EverStart Maxx has an extended lasting warranty of 5 years.
  • Take advantage of the free consultation, testing and installation offered by Walmart in its nationwide stores.

So for your ever starting and ever lasting battery needs, choose the name that guarantees it on its label. Choose EverStart!

If you’re facing a dead car, lawnmower, or any other 12-volt, lead-acid battery for that matter, you have probably been frustrated when your smart battery charger won’t recognize the battery and refuses to charge.

This doesn’t necessarily mean that your battery is worthy of the disposal center!

A smart battery charger won’t recognize a battery if the battery’s voltage is below a predetermined threshold. This is a safety feature of the smart charger so that it won’t electrocute something that isn’t a battery. Increasing the voltage with another battery can trigger the charger to start the charging process.

There’s a simple way to do this and I’ll cover that below and hopefully you’ll be back up and running in no time!

How to Make a Smart Charger to Recognize a Dead Battery

As I mentioned above, smart chargers are built with several safety features to prevent you from shocking something that isn’t a battery, from frying your charger by touching the leads together, and to prevent you from charging a battery when the incorrect leads are connected to the incorrect battery terminals.

While these are nice, and the pros definitely outweigh the cons, there comes the frustration when your smart charger won’t recognize a legitimate battery.

When you hook up the leads to the battery, the smart charger attempts to sense an initial surface charge so that it recognizes that it is indeed connected to a battery. Only when that surface charge is recognized will it begin to pump in a current to bring the battery to a full charge.

For chargers like a Deltran Battery Tender, seen here on Amazon, the minimum is 9-volts (for a 12-volt battery) or 1.5-volts per cell. Anything below 9-volts will result in the smart charger acting like a paperweight and giving you an error light.

How do we go ahead and fix this?

First, verify that:

Your battery has enough electrolyte to at least cover the lead plates (for flooded lead-acid batteries, not sealed)

Verify that your terminals aren’t corroded and preventing the smart charger from making a proper connection.

If you have a flooded battery and can remove the cap to expose the fill holes for the individual cells, make sure that you have enough liquid covering the lead plates inside. If you don’t, add only distilled water and add just enough to come up about 1/8″ above the plates.

I recommend adding the water with a plastic syringe used for children’s medicine to prevent spilling. After the battery has charged, we will add more water so that it comes up about 1/8″ below the fill line. After that, we will hook the smart charger to the battery again.

Also, clean up any corrosion with a wire brush. You can also use a paste of baking soda and water to help with anything that is stubborn. Be careful not to get the corrosion on your clothes or you will have holes in them, and also make sure to wear eye protection!

Now, the trick is to give the battery a temporary and artificial surface charge with another battery — and preferably a car with a functioning battery and jumper cables.

If your car battery is 12-volts, and the battery in question is 12-volts, then you can take a set of jumper cables and hook them up in the appropriate order as if you were jumping another car battery.

With the car running, hook one of the positive ends (red) of the jumper cables to the positive terminal on the bad battery, and then the other positive cable to the positive terminal of the good battery. Then hook the negative (black) end to the good battery and finally the other negative end to the negative terminal of the bad battery.

Again, make sure to have safety glasses on.

Then, wait for about 1-2 minutes. You can do this with a functioning car battery and a lawnmower battery, as long as they are both 12-volt batteries.

After 1-2 minutes, disconnect the jumper cables in the reverse order of how you installed them.

Take your battery to your smart charger and hook it up again. The battery should have enough of a superficial surface charge to trigger the battery charger to start the charging process!

Everstart 3a Smart Charger Instructions

Everstart 3a smart charger manual

If it doesn’t work, you can try the process a few more times before you give up.

If you do this without a running vehicle and just opt to use a good battery to give the dead battery a boost, be very careful and do not allow them to be connected very long. The good battery will likely treat the dead battery as a “direct short” and things will get hot very fast as it attempts to quickly dump its current into the bad one and you can risk an explosion of battery acid.

In the case with the battery connected to the running vehicle, the alternator is what is charging both batteries. Still, you shouldn’t allow this to go very long without disconnecting as it is a crude way to charge a battery. Remember, we’re not looking to charge the battery. We’re looking to put just enough current into it to trick the smart charger into starting the charging process.

What Could Cause A Battery to Not Keep a Surface Charge

If you have a bad or shorted out cell (cells) in your battery, then your battery is worthy of the graveyard. There’s nothing that you’re going to be able to do unless you want to follow the advice of people on youtube who are showing how to revitalize a dead battery with different chemicals.

I’m not a fan of the danger associated with messing with batteries in that manner, but that decision is up to you.

If you have a bad cell, it creates higher internal resistance which makes a charger work harder to charge the battery (if you can even get it to recognize the battery). The charger will try to bring the good cells up to a higher voltage than they were designed to be in order to make the total battery voltage around 12.6-12.7 volts.

Because the good cells can’t sustain such a high voltage and make up for the missing voltage of the bad cells, they will be in a state of overcharging which will evaporate out the water, expose the lead plates, and cause them to sulfate and short out as well.

Everstart Plus Charger Manual

Essentially, a dead cell will cause the other ones to die during the charging process.

You can test each cell on a flooded lead-acid battery with a hydrometer if you’re interested.

If you have a sealed battery, they can tolerate low levels of overcharging and recycle the evaporated water back into the electrolyte. If the overcharging is too high or goes on for too long you will not be able to replace the water levels that are lost as the battery vents out the pressure to avoid structural damage.

Let Me Know How it Goes!

Let me know if this trick worked for you or if you have a different way of getting a smart charger to recognize a dead battery! Good luck!

[email protected]